Filter
Top Products
C1671M (5/05) 5
7. Press the Enter key. The First Boot Device dialog box opens. Scroll down to CDROM, and then press the Enter key to make the CD-ROM the
first boot device.
8. Repeat steps 6 and 7 for the second and third boot devices. Select SCSI for the second boot device, and select HDD-0 for the third boot
device.
9. Press the F10 key to save the changes to the boot devices.
10. A message appears in the center of the screen asking if you want to “SAVE to CMOS and EXIT (Y/N)?” Type
Y
and then press the Enter key.
11.
For 480 GB models only:
The DX7100 recorder begins rebooting. When “Detecting” appears on the screen, press the Pause/Break key.
Count to 7, and then press the Enter key.