Filter
Top Products
C635M-A-QS (3/09) 5
SERVER CONFIGURATION UTILITY
To open this application, double-click the DX9000 Server Configuration Utility icon on your recorder’s desktop.
ᕡ Set the frame rate and resolution. The number of channels is set automatically.
ᕢ Select the recording format. The default is NTSC.
ᕣ Click Server Identification to change the computer name (default is Pelco1) and IP address (default is 100.0.0.101).
NOTE: Each recorder must have a unique recorder name and IP address.
ᕤ Enter the multicast group number. The last three numbers must match the last three numbers of the IP address. The default
is 239.0.0.101.
ᕥ Click Configure.
ᕦ Restart the recorder.
Figure 5. Server Configuration Utility
ᕣ
ᕥ
ᕡ
ᕢ
ᕤ