Filter
Top Products
C309M-J (9/04) 31
PARK TIME MINUTES
This feature causes the system to park at preset 1 after a programmed number of minutes of control inactivity. The time can be set from 1
minute to 720 minutes (12 hours), or it can be set to zero, which disables this feature.
NOTE: Preset 1 must be programmed for the dome to park.
To change the park time:
1. Program preset 95 (28). The main menu appears.
2. Position the cursor (>) beside Other.
3. Press the Iris Open button to enter the Other menu.
4. Position the cursor (>) beside Park Time Minutes.
5. Press the Iris Open button. The cursor moves to the right, beside the current park time.
6. Move the joystick up or down to change the park time.
7. SELECT – Press the Iris Open button on your keyboard to select your choice.
CANCEL – Press the Iris Close button if you do not want to change the setting.
<Camera>
<Line Sync>
<Power Up>
<Wiper>
<Limit Stop>
<Other>
Exit
MAIN MENU
Proportional pan On
Park time minutes 0
Scan Speed deg/s 25
Pattern Length 1.5 min
Spd Profile 90 MPH wind
Exit
Other Menu