Filter
Top Products
2 C1465M-A (9/06)
Important Safety Instructions
1. Installation and servicing should be done only by qualified service personnel and conform to all Local codes.
2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6, or 6P enclosure, it is designed for indoor use only and it must not
be installed where exposed to rain and moisture.
3. Only use replacement parts recommended by Pelco.
4. After replacement/repair of this unit’s electrical components, conduct a resistance measurement between line and exposed parts to verify
the exposed parts have not been connected to line circuitry.
5. The installation method and materials should be capable of supporting four times the weight of the enclosure, pan/tilt, camera and lens
combination.
The product and/or manual may bear the following marks:
This symbol indicates that dangerous voltage constituting a risk of
electric shock is present within this unit.
This symbol indicates that there are important operating and
maintenance instructions in the literature accompanying this unit.
Description
The HS2100 is a low-profile, high-security ceiling enclosure with rivited back box for mounting in fixed or dropped ceilings. The unobtrusive,
compact design complements any business or office decor and provides maximum surveillance for fixed applications when using CCD cameras.
The HS2100 is engineered for ease of installation and service. The upper section, mounted above the ceiling, is constructed of aluminum.
Because of its lightweight design, the upper section can be mounted directly on a ceiling tile without the use of additional mounting plates.
The lower section is made of steel to provide extra security. It is hinged to provide convenient access for camera and lens adjustments. The
adjustable camera mounting sled allows the camera to be positioned vertically or horizontally, depending on the camera size.
OPTIONAL ACCESSORY
E2100 Rotating mounting plate with 360 degrees of rotation in 10-degree increments. Features locking capability to secure enclosure
positioning. Replaces 2-ft x 2-ft (60.96 cm x 60.96 cm) ceiling tile. Can be used in 2-ft x 4-ft (60.96 cm x 121.92 cm) ceiling tile
with additional “T” rail for support. Constructed of aluminum with textured white polyester powder coat finish.
CAUTION:
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.