2 Pelco Manual C483M-E (9/97)
1.2 UNPACKING INSTRUCTIONS
Unpack and inspect all parts carefully.
The following parts are supplied:
1 Camera enclosure
1 1/4"-drive socket for tamper-resistant screws
1 7/64" Allen wrench
2 1/4-20 x 1/2" bolts
2 1/4" flat washers
2 1/4" split lock washers
Be sure to save the shipping carton and any inserts. They are the safest material in
which to make future shipments.
If an item appears to have been damaged in shipment, replace it properly in its
carton and contact the factory at 1-800-289-9100 or 1-559-292-1981 for a replace-
ment. (International customers fax 1-559-348-1120 for authorization and instruc-
tions.)
If an item needs to be returned to the factory for repair, consult the WARRANTY
AND RETURN section of this manual for instructions.
1.3 RECOMMENDED TOOLS
Pelco does not supply basic tools needed for the installation process. The following
tools are recommended:
Hand tools
Drill
Coaxial cable stripper
BNC crimp tool
Wire cutter
Wire stripper