4 Pelco Manual C1466M-A (5/98)
1.2 UNPACKING INSTRUCTIONS
Unpack and inspect all parts carefully.
The following items are supplied:
1 Enclosure
1 Installation/Operation Manual (C1466M-A)
1 Parts bag (Parts may be used to attach the camera to the mount.)
1 Hex bolt, 1/4-20 x 1/2"
1 Split washer
1 Flat washer
Be sure to save the shipping carton, boxes and inserts. They are the safest material
in which to make future shipments.
If an item appears to have been damaged in shipment, replace it properly in its box
and contact the factory at 1-800-289-9100 or 1-559-292-1981 for a replacement.
(International customers fax 1-559-348-1120 for authorization and instructions.)
If an item needs to be returned to the factory for repair, consult the WARRANTY
AND RETURN section of this manual for instructions.
1.3 RECOMMENDED TOOLS
Pelco does not supply the basic tools needed for the installation process. The fol-
lowing tools are recommended.
To install the enclosure and camera:
Pin-in-hex wrench (Included to remove tamper-resistant screw.)
Small adjustable wrench
Phillips screwdriver
BNC crimp tool
Wire stripper
Wire cutter
Coaxial cable stripper