Filter
Top Products
C3437M (8/07) 9
VIEW THE DEVICE USING A WEB BROWSER
1. Select the device to view, and then click Connect in the status field.
2. The IP device Login screen opens.
3. Enter admin (all lowercase) in the User ID and Password text boxes (admin is the default password).
NOTE: For security purposes, after you log on for the first time, change the password.
4. Click Login.
NOTE: For detailed information on how to use IP cameras with a Web browser, refer to Web Browser
Interface for Pelco IP Cameras operation manual.
SEARCH NETWORK
1. Click Search Now to locate any new devices connected to the network.
2. “Searching for devices” is displayed in the top, left-hand corner of the screen.
3. Wait for the software to discover the IP devices connected to the network. This process may take
several minutes.
4. All IP devices found on the network are listed.
UPDATE FIRMWARE
NOTE: Perform system upgrades only when necessary. Firmware upgrades do not need to be performed if
the system is operating properly.
Updated firmware and language files can be uploaded to the camera. To update firmware, complete the
following steps:
1. Open the Pelco Device Utility software.
2. Locate any device or devices that need to be updated in the Update field.
3. Click the Update Firmware button.
4. Select the file to upload and then click Open.
5. The Perform Update dialog box opens, do one of the following:
• Click OK to accept.
• Click Cancel to close the dialog box.
6. The Status field changes from Online to Updating Camera. When the update is complete, the field
status will change back to Online.
REMOVE DEVICE
Select an IP device, and then Click Remove Offline Devices. “Searching for devices” is displayed in the top,
left-hand corner of the screen, and then the status field for the device will change from green to red and
display “Offline”.
WARNING: Do not cycle power to the system during the upload process. The upload process
is not complete until the system reboots and “Online” appears in the status field of the Device
Utility.