Pelco IPSXM30CBW23-7 Security Camera User Manual


 
34 C1300M-B (6/05)
REVERSE
A blanked out area can be reversed to make it visible and the areas on both sides of it not visible.
The areas above and below the blanking area remain visible. Reversing the window a second time
will return it to its original condition.
CLEAR WINDOW
All areas that have been set for window blanking are cleared.
BLANK ALL ABOVE/BLANK ALL BELOW
Blank All Above and Blank All Below add additional flexibility to setting up privacy areas. These
settings are ideal for applications where a complete pan location needs to be blanked.
Blank All Above
Blanks everything above a user-defined tilt angle. A blanked band
will appear at the top of the screen. The following settings are
available:
OFF (default) No blanking
10 Blanks area from 10° above horizon to 90° above horizon
20 Blanks area from 20° above horizon to 90° above horizon
30 Blanks area from 30° above horizon to 90° above horizon
40 Blanks area from 40° above horizon to 90° above horizon
50 Blanks area from 50° above horizon to 90° above horizon
60 Blanks area from 60° above horizon to 90° above horizon
70 Blanks area from 70° above horizon to 90° above horizon
80 Blanks area from 80° above horizon to 90° above horizon
0 Blanks area from -2° below horizon to 90° above horizon
-10 Blanks area from -10° below horizon to 90° above horizon
-20 Blanks area from -20° below horizon to 90° above horizon
-30 Blanks area from -30° below horizon to 90° above horizon
-40 Blanks area from -40° below horizon to 90° above horizon
-50 Blanks area from -50° below horizon to 90° above horizon
-60 Blanks area from -60° below horizon to 90° above horizon
-70 Blanks area from -70° below horizon to 90° above horizon
-80 Blanks area from -80° below horizon to 90° above horizon
Blank All Below
Blanks everything below a user-defined tilt angle. A blanked circle
will appear below the specified angle. The following settings are
available:
OFF (default) No blanking
10 Blanks area from 10° above horizon to 92° below horizon
20 Blanks area from 20° above horizon to 92° below horizon
30 Blanks area from 30° above horizon to 92° below horizon
40 Blanks area from 40° above horizon to 92° below horizon
50 Blanks area from 50° above horizon to 92° below horizon
60 Blanks area from 60° above horizon to 92° below horizon
70 Blanks area from 70° above horizon to 92° below horizon
80 Blanks area from 80° above horizon to 92° below horizon
0 Blanks area from 2° below horizon 92° below horizon
-10 Blanks area from 10° below horizon to 92° below horizon
-20 Blanks area from 20° below horizon to 92° below horizon
-30 Blanks area from 30° below horizon to 92° below horizon
-40 Blanks area from 40° below horizon to 92° below horizon
-50 Blanks area from 50° below horizon to 92° below horizon
-60 Blanks area from 60° below horizon to 92° below horizon
-70 Blanks area from 70° below horizon to 92° below horizon
-80 Blanks area from 80° below horizon to 92° below horizon
EXIT
LANGUAGE ENGLISH
UNIT INVERSION OFF
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<UNIT SETTINGS>
<POSITION CALIBRATION>
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
PELCO EXSITE IPSXM
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<WIPER>
<AUX>
<CLEAR>
<PASSWORD>
BACK
EXIT
UNIT SETTINGS
STYLE GRAY
BLANK ALL ABOVE OFF
BLANK ALL BELOW OFF
<SET WINDOWS>
BACK
EXIT
WINDOW BLANKING
WINDOW NUMBER 1
<EDIT WINDOW LOCATION>
<EDIT WINDOW ZOOM>
ENABLE WINDOW NO
REVERSE
CLEAR WINDOW
BACK
EXIT
SET WINDOWS
10
20
30
40
50
60
7
0
80
10
80
70
60
50
40
30
20
HORIZONCAMERA