Pelco MC3600H-2X Security Camera User Manual


 
Pelco Manual C1982M-A (12/00) [ 15 ]
SPECIFICATIONS
GENERAL
CCD Sensor: 1/3-inch
Synchronization System: AC line lock or internal oscillator
Horizontal Resolution
MC3500S-2: 380 TV lines
MC3600H-2: 570 TV lines
Iris Control: Electronic/passive
Minimum Illumination
MC3500S-2: 0.1 lux at f1.2
MC3600H-2: 0.05 lux at f1.2
Signal-to-Noise Ratio 52 dB (AGC Off)
Gain Control: Automatic
Vertical Phase: Adjustable 0° ±120°
Automatic Gain Control: Selectable by DIP switch setting
Backlight Compensation: Selectable by DIP switch setting
Scanning System 525 lines, 2:1 interface
Auto Iris Lens Type: DC/video control
Video Output: 1 Vp-p, 75 ohms
Iris Control Range 1/60 - 1/100,000 second
ELECTRICAL
Power Requirements: 14-30 VAC
11-40 VDC
Power Connector: 2-pin terminal strip, push-in type
Video Connector: BNC
Lens Jack: 4-pin connector (miniature square)
Power Consumption: Less than 4 watts
MECHANICAL
Lens Mount C/CS mount (adjustable)
Camera Mount Use 1/4-20 screw, top or bottom of camera housing
ENVIRONMENTAL
Operating Temperature: 14° to 122°F (-10° to 50°C)
Storage Temperature: 14° to 158°F (-10° to 70°C)
PHYSICAL
Dimensions: 2.48 (W) x 2.67 (H) x 4.33 (D) inches (6.3 x 6.8 x 11 cm)
Weight (without lens): 0.77 lb (0.35 kg)
(Design and product specifications subject to change without notice.)