Filter
Top Products
Pelco Manual C1905M (10/99) 7
SPECIFICATIONS
GENERAL
Image Device 1/3-inch interline transfer CCD
Picture Elements 510 (H) x 492 (V)
Sensing Area 3.3 mm (H) x 4.4 mm (V)
Scanning System 525 lines, 2:1 interlace
Sync System AC line lock
Horizontal
Resolution 380 TV lines
Minimum
Illumination 0.06 lux at f1.2 (30 IRE, AGC on)
Signal-to-Noise
Ratio More than 45 dB (AGC off)
Automatic Gain Control AGC on
Phase Control V-phase control (±90°)
CCD Iris Control On/off switchable
1/60 to 1/100,000 second
Backlight
Compensation Pk/Av pot
Video Out 1.0 Vp-p, 75 ohms, sync negative, BNC type
Acceptable Lens
Mass 2.2 lb (1 kg) maximum
Auto Iris Lens Video- or DC-driven type (non-EE amplifier/non-ALC type), selectable
by switch on side of camera
ELECTRICAL
Power
Requirements 24 VAC, 60 Hz (screw terminals)
Power
Consumption 2.5W
Connectors Video out (BNC)
Lens (4-pin)
GND terminal
24 VAC terminals
MECHANICAL
Lens Mount C/CS mount (back-focus adjustable)
Camera Mount Removable mounting plate fits either top or bottom of camera housing;
uses 1/4-inch UNC-20 screw
ENVIRONMENTAL
Operating
Temperature 14° to 122°F (-10° to 50°C)
Storage
Temperature -40° to 140°F (-40° to 60°C)
Humidity 20 to 80%
PHYSICAL
Construction Aluminum case
Finish Light gray
Dimensions 2.31 (W) x 2.25 (H) x 4.49 (L) inches (5.87 x 5.72 x 12.99 cm)
Unit Weight 11 oz. (0.32 kg)
Shipping Weight 1 lb (0.45 kg)
ACCESSORIES
Supplied
Accessories Lens mount cap 4-pin plug for lens cable
(Design and product specifications subject to change without notice.)