Filter
Top Products
14 Pelco Manual C373M-F (10/98)
7.0 SPECIFICATIONS
MECHANICAL
Pan: 0-355° movement in horizontal plane
Speed 6°/sec ±1° (No load condition)
Torque 50ft/lb with specified voltage
Tilt: ±90° movement in vertical plane
Speed 3°/sec ± .5° (No load condition)
Torque 20 ft/lb with specified voltage
Maximum
Load: 100 lb (45.4 kg) at 5 inches (12.7 cm) from tilt table surface to
center of gravity
Gearing: Adjustable worm-gear final drive to prevent drift and minimize
backlash
Bearings:
Pan Heavy-duty ball bearings
Tilt Oilite bronze bushing
Braking: Dynamic for instantaneous stopping
ELECTRICAL
Input Voltage: 115 VDC required for pan/tilt
Power
Requirements:
Running:
Pan .30 amp (34 vA)
Tilt .30 amp (34 vA)
Starting:
Pan .44 amp (51 vA)
Tilt .44 amp (51 vA)
Connectors: AMP CPC type (mate supplied)
Motors: 115 VDC permanent magnet
Limit Switches:
Pan 5 amp
Tilt 5 amp
External adjustment
Conductor:
Requirements: 6, unshielded (Functions: left, right, up, down, motor common,
safety ground)
(Variable speed, no additional conductors. For models with PP
option, an additional 4 conductors are required.)