Filter
Top Products
Pelco Manual C342M-D (8/05) 3
LIST OF ILLUSTRATIONS
Figure Page
1 Removing the Screws ........................................................................8
2 Releasing the Covers ........................................................................8
3 Removing the Covers ........................................................................8
4 Hooking Cover Halves .......................................................................8
5 Tilt Limit Adjustment ...........................................................................9
6 Pan Limit Adjustment .........................................................................9
7 Replacing the Cover Halves ..............................................................9
8 Securing the Cover Halves ................................................................9
9 Connector Assembly ......................................................................... 11
10 Wiper On/Off Connection ..................................................................12
11 Pan/Tilt Adjustments .........................................................................20
12 PT780 Series Dimension Drawing ....................................................23
LIST OF TABLES
Table Page
A-1 37-Position Connector Pin Designations for Pan/Tilts with
EH4700L and EH5700L Enclosures .................................................13
A-2 37-Position Connector Pin Designations for Pan/Tilts with
EH8106L Enclosures ........................................................................14
B Requirements to Wire Power to Pan and Tilt Motors ........................15
C Maximum Cable Distances Using RB24 or RB115 Relay Boxes ......16
D Requirements to Wire Power to Camera Enclosure .........................17
E Requirements to Wire Power for Optional Heater Blanket ...............17
F 24 VAC Wiring Distances Chart ........................................................18
REVISION HISTORY
Manual Date Comments
C342M 1991 Original version.
C342M-A 4/96 Consolidated C344M and C345M manuals into C342M-A
manual. Revised installation instructions. Created
manual history and updated to new manual style.
4/96 Updated wiring instructions for EH8106L enclosures.
C342M-B 6/97 Put into new format. Revised exploded assembly
diagrams in Figures 12, 13, 14 and 15 to show
movement of the wire clamp and grommet from the side
to the bottom of the pan spindle per ECO #96-352. Pan
spindle nut (part # 9004004COMP) replaced by snap
ring (part # 80010019) per ECO #97-194. Figure 4
revised.
C342M-C 11/98 Revised Section 5.0, Maintenance. Moved Section 6.0,
Exploded Assembly Diagrams, to new service manual
(C342SM). Repaginated manual.
C342M-D 8/05 Added ratings per ECO 05-10441. Added WEEE
statement.