Pelco SB3-2 Security Camera User Manual


 
PELCO Manual C426M-F (2/98)
3
Figure 1-1. Inside View of Lower Dome
4. Attach the safety chain to the lower dome and make
certain that the chain does not interfere with proper
seating of the drive tab. (See Figure 1-1.)
CAUTION: Dome will shatter if dropped. Al-
ways operate with safety chain attached Do not
rotate pan/tilt by hand. Rotate by controller only.
5. Install the lower dome with viewing slot to the right
of the camera/lens with the lens pointed towards
you. Insert the rim of the dome into two of the roll-
ers. Align the drive tab with the slot in the drive
arm bracket. Press the dome against the rollers and
gently deflect the dome until you are able to insert
the rim into the final rollers. (See Figure 1-1.)
6. Operate pan/tilt to verify that there are no obstruc-
tions within the back box or dome.
Figure 1-2. SB2800 System Installation