Filter
Top Products
Pelco Manual C2423M (5/00) 21
3. Press the Iris Open button to enter the Other menu.
4. Position the cursor (>) beside Proportional Pan.
5. Press the Iris Open button. The cursor moves to the right, beside the word On or Off.
6. Move the joystick up or down to toggle between On and Off.
7. SELECT - Press the Iris Open button on your keyboard to select your choice.
CANCEL - Press the Iris Close button if you do not want to change the setting.
RESET CAMERA
Main Menu
<Camera>
<Line Sync>
<Power Up>
<Aux>
<Alarms, Zone Blank>
<Other>
EXIT
Camera Menu
Backlight comp Off
Zoom limit x72
Reset camera
<Gain/AGC>
<Auto-iris>
<Next>
Exit
Resetting the camera returns the settings to their defaults.
Default Settings
Backlight comp Off
Zoom limit X72
Gain/AGC
AGC mode Auto
Gain 6
Auto-iris
Mode Auto
Level 7
Slow shutter mode Auto
Shutter speed Auto
Auto focus mode Auto
IR Filter
IR filter mode Auto
Auto IR level Dusk
Sharpness 15
White balance
Auto white bal On
Red bal level No default
Blue bal level No default
When the camera is reset, the following settings are not changed: park time, auto flip
disable, limit stops, zoom limit, and proportional panning.
Turning off power to the Spectra II dome does not reset the camera. Camera settings are
retained in memory. When the power is turned back on, the settings will be the same as
they were when the power was turned off.
To reset the camera:
1. Program preset 95 (28). The main menu appears.
2. Position the cursor (>) beside Camera.
3. Press the Iris Open button to enter the Camera menu.
4. Position the cursor (>) beside Reset Camera.
5. Press the Iris Open button to reset the camera.