Filter
Top Products
10 PELCO Manual C428M-B (2/98)
Figure 5. SS3000 Exploded Assembly Diagram
NOTE:
The “Schneider” ring is not
shown in this diagram. It is de-
signed to fit over the square por-
tion of the upper dome (item 1).
9. Turn the system on and rotate the pan/tilt. Check for cable interference. Tilt the
camera up and down and check for clearance of all moving parts.
10. After all tests have been done and the system is functioning properly, attach
the safety chain to the upper dome with the fasteners provided. Install the
lower dome, being careful to align the viewing window.
11. Check for sufficient clearance between the lens and the lower dome.
CAUTION:
The lower
dome will shatter if
dropped. Always operate
with the safety chain at-
tached. Do not rotate pan/
tilt by hand. Rotate by con-
troller only.