Filter
Top Products
14 PELCO Manual C428M-B (2/98)
6.0 SPECIFICATIONS
ELECTRICAL
Input voltage: 24 VAC required for pan/tilt
Power
Requirements Running Starting
Pan: .31 amp (7.5 vA) .47 amp (11.2 vA)
Tilt: .38 amp (9.2 vA) .56 amp (13.5 vA)
Connectors
Pan/Tilt: AMP CPC type (mate supplied)
Lens: Hirschmann MAB6100
Video: BNC
Camera Power: Spade lugs
Motors: Two-phase induction type, instantaneous reversing
Limit Switches: 5 amp, external adjustment
Conductor
Requirements: See Section 3.1
MECHANICAL
(for detailed specifications refer to PT280 series product manual, C324M.)
Pan: Movement in horizontal plane:
PT280-24P 0-355°
PT280-24SL 0-360°
Pan Speed: 12°/sec ±1° (no load condition)
Tilt: ±90° movement in vertical plane
Tilt Speed: 3°/sec ± .5° (no load condition)
Max. Load: 15 lb (6.81 kg) at 5" from tilt table surface to center of gravity
Dome Drive: Lower dome mounts into upper dome with Velcro fasteners;
complete assembly is driven by pan/tilt
Max. Camera
and Lens Length: 16.0 inches (40.6 cm) including BNC connector