Filter
Top Products
C2223M-A (2/06) 5
4. Lock the mount:
a. Locate the slide lock at the base of the mount. Slide it to the right to secure the mount.
b. Turn the locking screw counterclockwise until the slide lock is secured.
Figure 3. Locking the Mount
5. If you are using coax video, attach a female BNC connector to the coax cable.
6. Install the Spectra Mini dome in the mount. Follow the instructions in the Switch Settings and
Hard Ceiling installation sections of the installation manual for the Spectra Mini dome system.
In the Hard Ceiling section, disregard step 2 about cutting holes in the ceiling. In step 5 of the
same section, attach the dome drive to the mount with the two 8-32 x 0.75-inch screws that are
supplied with the mount.
4b
4a