Filter
Top Products
274
Appendix
10
This function is not available
in the current mode
You are trying to set a function that is not
available in n, H or C mode.
Camera overheated.
Disabling Live View
temporarily
to protect circuitry
Live View cannot be used because the camera’s
internal temperature is too high. Try using Live
View again when the camera has cooled down.
The camera will turn off
to prevent damage from
overheating
The camera will turn off because its internal
temperature gets too hot. Leave the camera
turned off and give it enough time to cool down.
Turn it on again after a while.
Set the Eye-Fi communication
to "SELECT"
Images cannot be transferred when [Eye-Fi
Communication] is not set to [SELECT] in [Eye-
Fi] of the [R Set-up 2] menu. (p.228)
Error Messages Description