Filter
Top Products
198
Playback Functions and Image Editing
6
Developing RAW Images
You can convert captured RAW images into JPEG images, and save them
as new files.
1
Select a RAW image in the single image display, and press
the four-way controller (3).
The playback mode palette appears.
2
Use the four-way controller (2345) to select h (RAW
Development), and press the 4 button.
The screen to select a development method is displayed.
3
Use the four-way controller (23)
to select [Developing a single
image], and press the 4 button.
The parameters saved in the image file
appear.
Proceed to Step 6 if you do not need to
change the parameters.
If there are no images that can be
processed, [No image can be processed] appears.
4
Use the four-way controller (23)
to choose the parameter you
want to change.
You can select a different image by
turning the front e-dial (R).
Only RAW images captured with this camera can be edited. RAW images
captured with other cameras cannot be edited on this camera.
Developing One RAW Image
MENU
OKOK
OK
Developing a single imageDeveloping a single image
Developing multiple imagesDeveloping multiple images
MENU
OK
Image Capture SettingsImage Capture Settings
100-0001100-0001