Filter
Top Products
118
3
Taking Pictures
You can set this function to correct camera shake which can occur
during shooting. You can correct camera shake using optical shake
reduction only (CCD-Shift), or the both optical and electronic shake
reductions (Dual). The default setting is the optical shake reduction only
(CCD-Shift).
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Shake
Reduction].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to choose the Shake Reduction
setting.
5
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture status.
One of the following icons appears on the display.
Setting the Shake Reduction Function
CCD-Shift
Optical shake reduction only is used.
Dual
Both optical and electronic shake reductions are used.
Off No shake reductions are used.
Use the Movie SR function (p.130) to correct camera shake in C
(Movie) mode.
Rec. Mode
MENU
2/4
Movie
EV Compensation
D-Range Setting
Blink Detection
Digital Zoom
Shake Reduction
CCD-Shift
CCD-Shift
Dual
Off
0.0
OK
OK
Cancel