Pentax 14191 Digital Camera User Manual


 
230
9
Appendix
Messages
Messages such as the following may appear on the display during
camera operation.
Message Description
Battery depleted
The battery is exhausted. Charge the battery using the
battery charger (p.33).
Memory card full
The SD Memory Card is full and no more images can be
saved.
Insert a new SD Memory Card or delete unwanted images
(p.39, p.148).
Change the number of recorded pixels of recorded images
and try again (p.160).
Memory card error
Shooting and playback are impossible due to a problem
with the SD Memory Card. You may be able to display or
copy the images on the card using a computer.
The built-in memory is
not formatted
The data within the built-in memory are damaged. Format
the built-in memory.
Card is not formatted
The SD Memory Card you have inserted is unformatted or
has been formatted on a computer or other device and is
not compatible with this camera. Format the SD Memory
Card in the camera (p.190).
Card is locked The SD Memory Card is write-protected (p.7).
Compression error
This message appears when the camera fails to compress
an image. Change the number of recorded pixels of the
image and try shooting or saving it again.
No image/sound There are no image/sound files on the SD Memory Card.
Movie recording stopped
This message appears when the internal temperature of the
camera has exceeded normal operating limits while
recording a movie.
The camera will turn off
to prevent damage from
overheating
The camera turned off because it has overheated. Wait until
it cools down and then turn it back on.
Deleting
This message appears while deleting an image or sound
file.
Camera cannot play
this image and sound
You are trying to play back an image or sound in a format
not supported by this camera. You may be able to play it
back on another brand of camera or on your computer.
Image folder
cannot be created
The largest file number (9999) has been assigned to an
image in the largest folder number (999) and no more
images can be saved. Insert a new SD Memory Card or
format the card/built-in memory (p.190).