Filter
Top Products
127
Shooting Functions
4
5
Press the 4 button.
The adjustment value is saved.
6
Press the 3 button three times.
The camera returns to Capture mode.
7
Take a test picture.
You can easily check the focusing point by enlarging the image during
Digital Preview (p.138) or Live View (p.165).
Choose the part of the viewfinder to set focus to. The factory default
setting is S (Auto).
Selected AF point(s) light red in the viewfinder (Superimpose AF Area).
1
Turn the AF point switching dial.
Even when an adjustment value has been saved using [Apply One], if you
press the 4 button with [Apply All] selected in Step 3, the [Apply All] value is
used instead of the [Apply One] value.
Selecting the Focusing Area (AF Point)
U
Center Sets the focusing area to the center of the viewfinder.
j
Select
Sets the focusing area to the user selected point from eleven
points in the AF frame.
S
Auto
The camera selects the optimum AF point even if the subject
is not centered. You can select from 11 AF points (default
setting) or 5 points in [AUTO AF Point Setting] in the [A Rec.
Mode 1] menu.