Filter
Top Products
2727
b. Screw-on Type (DA 40mm f/2.8 Limited dedicated lens hood)
Screw the hood on to the front of the lens to attach it.
c. Bayonet Type
When attaching the lens hood, align the index on the lens hood with the attaching index
on the lens, and push both parts straight toward each other. Attach the lens hood on the
lens by turning the hood in the clockwise direction, as viewed from the front of the lens,
to lock it until it clicks into position.
"Memo:
• When attaching the lens hood, hold the focusing ring and zoom ring securely to
prevent them from turning.
• When the lens hood is not in use, it can also be turned around and attached in the
reversed position.
b
c
Lens hood
attaching
index
e_da21_20.fm Page 27 Thursday, April 23, 2009 5:34 PM