Filter
Top Products
66
Taking Pictures
Taking pictures
b
Set the Mode dial to .
The screen for taking the first picture appears in the middle
of the LCD monitor.
n
Take the first picture.
Hold the camera so that the subject
is in the middle of the screen, and
press the shutter release button.
The picture is displayed in the left
half screen of the LCD monitor.The
right half screen is for taking the
second picture.
m
Move the camera to right without
changing your stance.
,
Take the second picture.
Make sure that the subject is in the middle of the right half
of the screen and press the shutter release button.
When you have taken the second picture, the screen
returns to Step
n
.
.
Press the Playback button.
The LCD monitor displays both the left and right images.
• The 3D image mode is not available when TIFF is selected
for the image quality.
• To cancel the 3D image mode, press the Menu/Fn button or
change the 3D image mode to another Capture mode.
• A clear three-dimensional effect will not be achieved if the two
images are taken in widely different positions (heights) or are
not straight.When taking a person, you are recommended to
ask your model to stay as still as possible and to take the
second picture as quickly as you can. It is easier to take the
pictures if you use a tripod or appropriate base.
• As a guide, the camera should be moved about 1/40 of the
distance between the camera and the subject. For example, if
the subject is 3m away, the distance the camera should be
moved will be 3m÷40=7.5cm.
However, as the way people see three-dimensional images
differs from person to person, there is no need to be too con-
cerned. Refer to the table below for a simple guide to how far
to move the camera.
memo
1414
Distance to subject
Camera movement
0.1 m
0.5 cm
0.3 m
1 cm
0.5 m
1.5 cm
1 m
2.5 cm
3 m
7.5 cm
5 m
13 cm
1414
11:19 11:19
02/20/200302/20/2003
e04_kb338_038_088_41e.qk 3/17/03 5:23 PM Page 66