Filter
Top Products
ADVANCED OPERATION
45
Multiple-Exposure
Mode
After taking the first picture as
normal, move the multi-exposure
lever in the direction of the arrow.
Cock the shutter while holding
down the lever.
The film does not advance at this
stage, so the second shot will be
imposed on the previous shot.
The film counter indicator in the
viewfinder and on the LCD
panel blinks when the wind lever
is set back to its original
position.
You can take trick pictures
by overlapping multiple
shots on one frame using
the Multiple-Exposure
Mode.
● Operate the multi-exposure
lever before you cock the
shutter. Otherwise, the
frames may be misaligned.
● The frames may be
misaligned if you take a
picture in the Multiple-
Exposure Mode.
● When the film is wound
halfway, you can release a
finger from the multi-
exposure lever. The lever
stays in the lock position
and the film counter
indicator blinks.
Next page ➥➥
1
2
3