Filter
Top Products
Checking the Exposure Indicator
Point the camera at the subject and check
the position of the exposure indicator inside
the viewfinder.
Press the shutter button if the indicator
is inside the proper exposure range.
• The shutter cannot be released if the
exposure indicator is either over or under
11 the exposure warning mark.
• If the indicator points to the under
exposure warning mark, turn the shutter
speed ring clockwise until the indicator moves
to the proper exposure range, or use Canolite
D or other flash units.
• If the indicator points to the over exposure
warning mark, turn the shutter speed ring
counterclockwise until the indicator moves
to the proper exposure range, or use an ND
filter.