Filter
Top Products
Mercury Battery Loading
Before using your Canonet G-III,
load it with the mercury battery.
To open cover of the battery com-
partment, insert fingernail in open
slot, sliding cover in direction of
arrow. By using a slight pull out-
ward, the cover will hinge open.
3
Insert the battery on the tab in
the compartment.
• Be sure the mercury battery
is inserted only in the correct
direction.
• A 1.3v M20 (#625) mercury
battery should be used—equivalent
to Mallory PX-625, Eveready EPX-
625.
Press cover to close.
Replacing Battery
When replacing the mercury bat-
tery, open the cover of the mer-
cury battery compartment and
pull out the tab. The battery
can then be easily removed.
• When the camera will not be
used for long period, remove the
battery.