Pentax K-50 Digital Camera User Manual


 
264
Appendix
10
The Shake Reduction function operates by obtaining the lens information
such as focal length. Set the focal length when using a lens for which the
focal length information cannot be automatically obtained.
1
Make sure that [Shake Reduction] is activated, and turn
the camera off.
Refer to “Reducing Vertical and Horizontal Camera Shake” (p.116) for
details.
2
Attach a lens, and turn the camera on.
The [Input Focal Length] screen appears.
3
Turn the rear e-dial (S) to set
the focal length.
Select from the following focal length
values. (The default setting is 35 mm.)
4
Press the 4 button.
The camera is ready to take a picture.
Setting the Focal Length
8 101215182024283035
40 45 50 55 65 70 75 85 100 120
135 150 180 200 250 300 350 400 450 500
550 600 700 800
If the focal length for your lens is not listed above, select the value closest to
the actual focal length (example: [18] for 17 mm and [100] for 105 mm).
When using a zoom lens, select the actual focal length at the zoom setting
being used in the same manner.
To change the focal length setting, use [Input Focal Length] in the [A Rec.
Mode 3] menu.
When using a lens without an s position or a lens with an s position with the
aperture ring set to a position other than s, set [22. Using Aperture Ring] to
[Enable] in the [A Custom Setting 4] menu. (p.265)
Input Focal LengthInput Focal Length
OKOK
OK
CancelCancel
MENU
3030 4040
3535