Filter
Top Products
95
Shooting Functions
4
6
Press the shutter release button fully.
Press and hold the shutter release button until three pictures are taken.
The pictures will be taken according to the order set in [6. Bracketing
Order] of the [A Custom Setting 1] menu.
• When the focus mode is set to l, the focus position is locked in the first
image and is used for subsequent images.
• When you take your finger off the shutter release button during Exposure
Bracketing, the exposure setting will remain effective for twice the amount of
the meter operating time (p.97) (default setting is about 20 seconds) and you
can take a picture at the next compensation value. After about twice the
amount of the meter operating time elapses, the camera returns to settings
for taking the first image.
• When [7. One-Push Bracketing] of the [A Custom Setting 1] menu is set to
[On], even if the shutter release button is not continuously pressed, three
pictures are automatically taken with one press of the shutter release button.
• Select [Single Frame Shooting] in the Drive Mode setting screen to cancel
Exposure Bracketing. The setting is canceled automatically when the camera
is turned off if you clear the check box for [Drive Mode] in [Memory] of the [A
Rec. Mode 4] menu. (p.217)
• You can combine Exposure Bracketing with the built-in flash or an external
flash (P-TTL auto only) to continuously change only the flash output.
• If you use Exposure Bracketing frequently, you can assign it to the |/Y
button. (p.167)