Pentax K-50 Digital Camera User Manual


 
217
Changing Additional Settings
7
3
Press the 3 button.
The screen that was displayed before selecting the menu item appears
again.
You can select which function settings to save when the camera is turned
off. The following function settings can be saved.
1
Select [Memory] in the [A Rec. Mode 4] menu, and press
the four-way controller (5).
The [Memory 1] screen appears.
When the type of batteries actually being used is different from the item you
selected here, the battery level will not be correctly determined. Please set the
correct battery type. Usually, there is no problem using [Auto-detect], however
it may take a while to detect the battery type. In low temperatures and when
using batteries that were stored for long periods of time, set the appropriate
battery type so the camera can correctly determine the remaining battery level.
Selecting Settings to Save in the Camera
(Memory)
Function
Default
Setting
Function
Default
Setting
Flash Mode O Flash Exposure Comp. O
Drive Mode O Digital Filter P
White Balance O HDR Capture P
Custom Image O Shooting Info Display P
Sensitivity O Playback Info Display O
EV Compensation O File No. O
This setting cannot be performed when the mode dial is set to B or C.