Filter
Top Products
65
4
Taking Pictures
6 Press the shutter release button fully.
The picture is taken.
To switch to the screen for registering a frame, press the Green button
in Step 3. You can register frames which you have downloaded from the
internet, etc. When you register a new frame, it replaces one of the
existing three frames in the built-in memory. Before you register a new
frame, copy it first to the SD Memory Card.
1 In the frame selection screen, choose the frame you
want to replace and press the Green button.
A message appears and the frames on the SD Memory Card that you
can register in the built-in memory appear.
2 Use the four-way controller (45) to choose the frame
you want to register and press the 4 button.
The frame is registered in the built-in memory instead of the frame
selected in Step 1.
• The frame function is not available in C or O mode.
• Press the 3 button in the frame selection screen to display
the [A Rec. Mode] menu.
• The number of recorded pixels is fixed at h and the quality level
at D.
To Register a New Frame
When a new frame on the SD Memory Card is registered in the built-
in memory, it replaces one of the existing frames in the built-in
memory. The replaced frame is deleted from the built-in memory.
Visit the PENTAX website at the URL below to download new frames.
http://www.pentax.co.jp/english/support/digital/optio_frame.html