Filter
Top Products
30
1
Getting Started
1
Connect the DC terminal of the AC adapter to the DC
input terminal of the DC coupler.
2
Make sure that the camera is turned off and open the
battery/card cover.
Slide the battery/card cover in the direction 1. The cover will
automatically open in the direction 2 when you release your fingers
from it.
3
Insert the DC coupler into the battery compartment,
making sure the (+) and (–) terminals on the coupler
match the (+) and (–) symbols inside the battery
compartment.
4
Open the DC coupler cable cover, pass the DC coupler
cable through the opening, and close the battery/card
cover.
Slide the battery/card cover in the opposite direction of 1. Slide the
battery/card cover all the way in to make sure it is securely closed.
5
Connect the AC plug cord to the AC adapter.
6
Plug the AC plug cord into the power outlet.
• Make sure that the camera is turned off before connecting or
disconnecting the AC adapter.
• Make sure that the AC plug cord and the DC coupler cable are inserted
securely. The data may be lost if either becomes disconnected while
data is being recorded on the SD Memory Card or the built-in memory.
• Use the AC adapter with due care to avoid fire or electric shock.
Be sure to read “USING YOUR CAMERA SAFELY” (p.1) and “About
the AC Adapter” (p.3) before using the AC adapter.
• Be sure to read the operation manual accompanying the AC adapter
kit K-AC62 before using the adapter.