Filter
Top Products
5
• The temperature range in which the camera can be used is 0°C to 40°C
(32°F to 104°F).
• The monitor may appear black under high temperatures, but will return to
normal as temperatures normalize.
•
The response speed of the liquid crystal display becomes slow at low
temperatures. This is due to the properties of the liquid crystal and is not a fault.
•
Sudden temperature changes will cause condensation on the inside and
outside of the camera. Place the camera in your bag or a plastic bag, removing
the camera after temperature of the camera and surroundings are equalized.
• Be careful not to allow dirt, mud, sand, dust, water, toxic gases or salt to
enter the camera as this may damage the camera. Wipe away any
raindrops or water droplets and allow the camera to dry.
• Please do not press forcefully on the display. This could cause breakage
or malfunction.
• Be careful not to sit down with the camera in your back pocket as this may
damage the exterior of the camera or the display.
• When using a tripod with the camera, be careful not to overtighten the
screw in the tripod socket on the camera.
• Do not clean the product with organic solvents such as thinner, alcohol or
benzene.
• Do not store the camera with preservatives or chemicals. Storage in high
temperatures and high humidity can cause mold to grow on the camera.
Remove from the case and store in a dry and well-ventilated location.
• Periodic checks are recommended every 1 to 2 years in order to maintain
high performance.
• Refer to “Precautions When Using an SD Memory Card” (p.33) regarding
the SD Memory Card.
• Please note that deleting images or sound files, or formatting the SD
Memory Cards or the built-in memory does not completely erase the
original data. Deleted files can sometimes be recovered using
commercially available software. It is the user’s responsibility to ensure the
privacy of such data.
Cleaning Your Camera
Storing Your Camera
Other Precautions