Filter
Top Products
208
7
Settings
Using the Clock Function
You can view the time (Clock mode) on the display.
1
Make sure the power is turned off.
2
Press and hold the 4 button.
The camera turns on and the Clock mode
screen appears.
The camera turns off automatically after
approximately 10 seconds. If you press the
power switch while the Clock mode screen
is displayed, the camera will turn off
immediately.
You can set the alarm to ring at a specified time. You can choose
whether the alarm will ring only once at the set time or at the same time
every day.
1
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
Use the four-way controller (23) to select [Alarm].
3
Press the four-way controller (5).
The [Alarm] screen appears.
4
Press the four-way controller (5).
A pull-down menu appears.
Displaying the Time
Setting the Alarm
SAT. 8/8 PM 2:25