Pentax V10 Digital Camera User Manual


 
73
4
Taking Pictures
R q < i \ c Q E D
In this mode, pictures are taken continuously as long as the shutter
release button is pressed.
1 Press the four-way controller (2) in A mode.
2
Use the four-way controller (
45
)
to select
1
(Continuous Shooting)
and press the
4
button.
The camera is ready to take a series of
pictures.
3 Press the shutter release button
halfway.
The focus frame on the LCD monitor turns green if the subject is in
focus.
4 Press the shutter release button fully.
Pictures are taken continuously as long as you keep the shutter
release button pressed.
Taking a Series of Pictures
1
Continuous
Shooting
Each time a picture is taken, the image is saved in the memory
before the next image is taken. The higher the image quality, the
longer the interval between shots.
The flash does not discharge in Continuous Shooting mode.
The continuous shooting function is not available in s, b, A, d,
O, z, e or Y mode.
You can continue shooting until the memory capacity of the SD
Memory Card or built-in memory is full.
The interval of continuous shooting will vary according to the
Recorded Pixels and Quality Level settings.
The focus, exposure and white balance are locked with the first image.
1, 2
3, 4
2
Continuous Shooting
Continuous Shooting
Drive Mode
Drive Mode
OK
OK
OK