20
Viewnder
This camera has two viewnders; one is a
miniature LCD in the viewnder and the other is a
retractable 3.5-inch LCD.
Use the viewnder that best suits the application
and shooting conditions.
The brightness and hue may differ between the
images appearing on the viewnder and LCD
monitor and those displayed on a TV monitor.
To see how the nal images will appear, check
them on a TV monitor.
Images are always displayed on the viewnder.
Using the viewnder
1 Set the POWER switch to ON and check
that images appear in the viewnder.
Keep the LCD monitor closed.
POWER
ON
OFF
2 Adjust the viewnder’s angle so that the
screen is positioned where it is easiest to
see.
You can move the view nder out to about 90
degrees perpendicular to the camera.
3 Adjust the diopter adjustment lever so
that you can see the characters on the
viewnder screen clearly.
Viewnder diopter dial
Eye piece
Do not point the eye piece at the sun or
other strong light source.
Light concentrated by the lens could damage
internal components and poses a re hazard.
•
•
•
•
•
Fitting the eye cup
Attach the eye cup by aligning the projections
on the eye cup holder and eye cup and tting
them together.
Turning the eye cup after attaching it may
cause the eye cup holder to come off. If the
eyecup holder does come off, see “Cleaning
the Viewnder” (page 119) for details on how
to ret it.
Eye cup holder
Eye cup
Projection
•