Filter
Top Products
Recording Mode
-30-
2
Press the [ENTER] Button (17).
≥The [AWB] Indication appears.
3 Press the [5] Button (16) or [6] Button
(19) to select a desired White Balance
Mode.
1) Automatic White Balance Adjustment [AWB]
2) The white balance setting that was previously
set manually [1]
3) Outdoor Mode [z]
4) Indoor Mode (recording under incandescent
lamp) [{]
To Resume Automatic Adjustment
Press the [5] Button (16) or [6] Button (19)
until the [AWB] Indication appears. Or, set the
[AUTO/MANUAL/FOCUS] Switch to [AUTO].
ª About Black Balance Adjustment
Black Balance Adjustment is one of the functions
of the 3CCD system. It automatically adjusts the
hue of black color in the picture. When the Black
Balance Adjustment is activated, the screen
becomes dark for a moment.
1Adjusting the Black Balance (Blinking)
2Adjusting the White Balance (Blinking)
3Adjustment is completed. (Lighting)
Adjusting White Balance Manually
White Balance Adjustment recognizes the colour
of light and adjust so that the white colour will
become pure white. The Movie Camera
determines the hue of light that comes through
the Lens and White Balance Sensor, thereby
judging the recording condition, and selects the
closest hue setting. This function is called
Automatic White Balance Adjustment.
For light outside the functional Auto White
Balance Adjustment range, use the Manual White
Balance Adjustment Mode.
FADE
STILL
ENTER
is
(17)
1
1
1
1AWB
1)
3)
2)
4)
123
1 Set the [AUTO/MANUAL/FOCUS] Switch
(35) to [MANUAL].
≥The [MNL] Indication appears.
2 Press the [ENTER] Button (17).
≥The [AWB] Indication appears.
3 Press the [5] Button (16) or [6] Button
(19) until the [1] Indication is displayed.
4 Point the Movie Camera at a full-screen
white subject.
5 Keep pressing [ENTER] Button (17) until the
[1] Indication stops flashing.
To Resume Automatic Adjustment
Press the [5] Button (16) or [6] Button (19)
until the [AWB] Indication is displayed. Or, set the
[AUTO/MANUAL/FOCUS] Switch to [AUTO].
ª About White Balance Sensor
The White Balance Sensor (29) determines the
nature of the light source during recording.
≥Do not cover the White Balance Sensor with
your hand during recording because White
Balance will not function normally.
≥The red light from the Recording Lamp
(27) will
be reflected off your hand or object, possibly
causing the White Balance sensor to operate
incorrectly and changing the colouring.
AUTO
MANUAL
FOCUS
(35)
FADE
STILL
ENTER
is
(17)
MNL
1
(27)
(29)
120.200B.book 30 ページ ２００４年２月２５日 水曜日 午後４時０分