Filter
Top Products
6 EN
Connect power
Note
When you position the PhotoFrame, ensure •
that the power plug and outlet are easily
accessible.
1 Connect the supplied power adaptor to:
the • DC socket of the PhotoFrame
the AC outlet•
A few seconds later, the PhotoFrame »
turns on automatically.
3 Get started
Caution
Use the controls only as stated in this user •
manual.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Install the stand
To place the PhotoFrame on a flat surface,
attach the supplied stand to the back of the
PhotoFrame.
1 Insert the stand into the PhotoFrame.
2 Screw the stand into the stand hole
firmly.