Filter
Top Products
27
English
4 Select a format, and then press OK.
Set SmartPower timer
With the SmartPower timer, you can configure
the time for the display of the PhotoFrame to
turn on or turn off automatically. When the
display automatically turns off, the PhotoFrame
goes to standby (sleep) mode.
Note
Ensure that the current time of the •
PhotoFrame is set correctly.
1 In the home screen, select [Settings] and
then press OK.
2 Select [Time and Date], and then press
OK.
3 Select [Set Time] / [Set Date], and then
press OK.
4 Move the joystick up/down/right/left to
adjust minute/hour/day/month/year, and
then press OK.
Set time/date format
1 In the home screen, select [Settings] and
then press OK.
2 Select [Time and Date], and then press
OK.
3 Select[Select Time Format] / [Select
Date Format], and then press OK.
English
EN