Filter
Top Products
Planar A480-PL User Manual and Installation Guide, Version 2.3, copyright 2009, all rights reserved, Planar Inc.
Page 7
PD8130/PD8150 installation instructions
CONNECTING THE AKPro ATTACHMENT PLATE
(Chief RPA mount and Phillips screwdrivers required)
1. Position the projector bottom-up on a soft surface. Consult the Attachment Plate
Diagram for plate orientation, mounting hole locations and required screws and spacers
for the PD8130 or PD8150. Insert and tighten each M4x30 screw through an
appropriate silver washer and lock washer, the designated holes in the Attachment
Plate, then through the 5/8” nylon spacers and finally into the projector ceiling mount
holes.
2. Using the included gold hex key, install the six 7/8” socket head screws each through a
3/8” aluminum spacer and into the six threaded holes from the ceiling side of the
attachment plate. Thread only enough to extend the screw to the bottom of the plate.