Filter
Top Products
28 Polaroid PhotoMAX PDC 640 Quickstart Guide
Displaying images on a TV
You can view the images stored in your camera on any
TV equipped with a video input terminal. For more
information about using your TV for video input, refer
to the manufacturer’s manual for your TV.
1. Turn off the TV and the power to the camera.
2. Set the video mode, if needed.
3. Plug one end of the video cable into the video input
connection on the TV.
4. Open the memory compartment on your camera
and the plug the other end of the video cable into
the TV connection.
5. Turn on the TV and set the channel used for video
input.
6. Turn on the camera.
7. Press the Menu button and then press the Menu
button again to review the images.
You also can press the LCD review button and use
the up and down arrow buttons to review the
images.
PDC640.FM Page 28 Wednesday, September 30, 1998 1:23 PM