Filter
Top Products
INSTALLATION
Connect the Multi-Reader directly to any USB port on your computer or use the included USB cable.
IMPORTANT: To enable the SuperSpeed transfer capability, the reader must be connected to a USB 3.0
SuperSpeed port. This reader is compatible with older USB 2.0 connections but will not offer high speed transfers.
Double-click on "My Computer" to confirm that the two drive letters labeled Removable Disk appear.
Check that the internal blue power LED lights confirming a proper connection.
Insert your memory card in the appropriate reader slot to use the card reader function.
Double-click on the corresponding drive letter to read or write desired files to or from your computer or storage
card.
OPERATIONS GUIDE
OVERVIEW
The read and write commands for memory cards are the same as those used for moving data to and from any
other computer storage device, such as a USB drive or floppy disk. You simply plug the PROMASTER
®
Professional Universal Memory Card Multi-Reader into any USB port of your PC or Mac and begin transferring
information stored on flash media cards to your computer and back.
OPERATING TIPS
Copying Files Between Memory Cards
In addition to moving data between your Reader/Writer and your computer, you may move data between card
types. Assuming an SD/MMC/MS/xD card was inserted, you could copy this data to a Compact Flash card also
inserted in the Multi-Reader.