ProMaster Universal Memory Card Multi-Reader Camera Accessories User Manual


  Open as PDF
of 3
 
Inserting and Removing a Memory Card
When inserting cards, the memory card should be inserted with the card label in the same direction as the LED
power light. Also, make sure that a card's indented tracks line up with the side rails in the Compact Flash slot.
Insert the card carefully and firmly until it is fully seated in the slot.
To remove the card, pull out the card carefully.
SPECIFICATIONS
Main Chip: GL3220 128pin Firmware version: Flash Version
Dimensions: Height 16 mm x Length 90 mm x Width 38.4 mm
Blue LED On: USB 3.0
Blue LED blink: Access/ Read/ Write
Operating Humidity: 20-80% RH, (Non Condensing)
Operating Temperature: 20 to 50 degrees (Celsius)
Sockets: CF Type I/II Socket x1; All in one Socket x1
Storage Temperature: 0 to 70 degrees (Celsius)
Interface: USB 3.0, 2.0 and 1.1 compliant
Operating System Support: Win 98, 98SE, 2000, ME, XP, Vista, 7, Mac OS 9.0 or Later
Mass storage Driver support: Windows 7, Vista, ME, XP, Win2000 (SP3, SP4), Linux2.4.X, Mac OS 10 or
Later
Unit Wt.: 65g
ONE YEAR UNCONDITIONAL WARRANTY
If for any reason, this ProMaster
®
product fails within ONE YEAR of the date of purchase, return this product to
your ProMaster
®
dealer and it will be exchanged for you at no charge. ProMaster
®
products are guaranteed for
ONE FULL YEAR against defects in workmanship and materials. If at any time after one year, your ProMaster
®
product fails under normal use, we invite you to return it to ProMaster
®
for evaluation.
Made in Taiwan
Code 9546
www.promaster.com
Fairfield, CT 06825
 previous