Filter
Top Products
26
Date and Time Display
12:00AM
1/ 1/1996
n
s
y
/
1. Attach a power supply (battery or
adapter/charger) to the camcorder.
2. Press and hold the small button on
CAMERA/OFF/VCR and place in
CAMERA.
3. Press DATE/TIME to display the date
and time in the viewfinder. A flashing
cursor lets you know which part of
the display you are setting.
Note: If flashing cursor does not appear,
press and hold DATE/TIME and then press
STOP/EJECT.
5. When the correct digit is displayed,
press STOP/EJECT. The cursor will
move to the next part of the display.
6. Repeat steps 4 and 5 to set the correct
month, day, year, hour, minute(s), and
AM/PM.
7. After setting AM or PM, press
DATE/TIME to remove the flashing
cursor and start the internal clock.
To Correct the Date or Time
To correct the date or time, press and
hold DATE/TIME and then press
STOP/EJECT. The display will appear in
the viewfinder along with the flashing
cursor. Use F.FWD and REW/REVIEW to
correct the time or date. Press
DATE/TIME to remove the flashing
cursor and start the clock.
4. Repeatedly press F.FWD or
REW/REVIEW until correct month
appears. Press and hold the button to
advance the digits faster.
STOP/EJECT
REW (Rewind)/REVIEW
F.FWD (Fast Forward)
DATE/TIME
Set the Time and Date
CAMERA/OFF/VCR