Filter
Top Products
48
Optional Accessories
AH011 Cable Transformer
These RF cables are used with the RF output adapter to
connect your camcorder to a standard TV (one without
audio/video input jacks) for playback.
If your antenna cable is the flat twin-lead type attached by
two screws, you will also need a 300-75 ohm transformer
such as 193983.
If your TV has 300 ohm antenna screw terminals, you will
need an optional 75-300 ohm transformer such as AH011.
CRF95 RF Output Adapter
This adapter is used with coaxial RF cable (VH82 or VH85) to
connect your camcorder to a standard TV (one without
audio/video input jacks) for playback. If your antenna cable is
the flat twin-lead type attached by two screws, you will also
need a 300-75 ohm transformer such as 193983. If your TV
has 300 ohm antenna screw terminals, you will need an
optional 75/300 ohm transformer such as AH011.
Coaxial RF Cables
193983 Cable Transformer
This 300-to-75 ohm transformer is used to connect a
standard 300-ohm antenna twin-lead to a standard round
75-ohm connector.
This 75-to-300 ohm transformer is used to connect a
standard 75-ohm antenna cable, such as AH065G or
AH066G, to the 300-ohm screw terminals on a TV.
VH82 (6-ft)
VH85 (12-ft)
AH25 Y-Adapter
This Y-adapter allows you to connect your camcorder’s mono
audio cable to a stereo TV or VCR.
VH83 Audio/Video Cable
This six foot audio/video dubbing cable is used to
connect your camcorder to a VCR or TV monitor to
copy tapes.