Filter
Top Products
27
Date and Time Display
The time and date, date only, or date and title can be recorded on your tape. Whenever
one of the displays appears in the viewfinder, it will be recorded. The camcorder also
has auto date and auto title features.
Charging the Ca m c o r d e r’s Built-in Clock Ba t t e r y
The camcorder has a built-in rechargeable clock battery.
This battery must be charged approximately every two months.
Recording Date and Time, Date, or Date and Title on Your Ta p e
11/18/1996
AUTO
11/18/1996
10:30AM
11/18/1996
Date and Time
Date Only
No Display
Auto Date
Repeatedly Press
DATE/ TIME
1 . Attach a power supply (adapter/ charger
or charged battery) to the camcorder.
2 . Make sure CAMERA/OFF/VCR is
in O F F.
3 . Leave the power supply attached at least
24 hours.
Cautions: If this battery is not charged
every two months, it will over-discharge
and shorten its useful life.
Do not attempt to replace this battery.
Take the camcorder to an authorized
Servicenter.
TITLE
11/18/1996
Auto Title
To Select Display to Record
1 . Repeatedly press D A T E / T I M E to select
the display you want to record.
• Select date and time to continuously
record the date and time.
• Select AUTO to automatically
record the date for 10 seconds at the
beginning of the recording.
• Select TITLE to automatically
record the title and date for 10
seconds at the beginning of the
recording.
• Select date only to continuously
record the date.
• Select no display if you do not want
any of the displays recorded.