Filter
Top Products
66
Trouble Checks
AE Shutter-Speed or
INDEX Indicator Does
Not Appear in
Viewfinder
Date and Time (or Date)
were Recorded on the
Tape
Date and Time Appear
Incorrect
Camcorder Does Not
Turn On and/or
Function Buttons Will
Not Operate
• CAMERA/OFF/VCR switch must be in CAMERA,
and press DISPLAY to display the indications.
• Date and time (or date) will be recorded on the tape
whenever they appear in the viewfinder. Press
DATE/TIME to remove them from the viewfinder
when recording.
• Make sure the date and time have been set. Details
on page 26.
• The camcorder’s internal clock battery may need
recharging. Details on page 27.
• Remove the power source.
After one minute press the
reset switch gently using a
non-metallic pointed item,
such as a toothpick, until
you feel a click. This resets
the camcorder to the factory
settings and erases the date,
time, and custom settings.
Note: When connecting a
power source again, wait for
about one minute after the
reset switch is pressed.
Trouble Checks and Adjustments
Reset Switch