Filter
Top Products
23
Videocassettes
CAUTION:
Insert the
cassette only one
way with the
tape wheel
facing up and the
tape window
facing out. The
cassette should
slide easily into
the holder. Do
not force the
cassette.
Cassette Care and Storage
• When you are finished with a cassette,
rewind it, remove it from the cam-
corder, and label it.
• Store cassettes vertically in their
protective cases at normal room
temperatures. Do not leave your
camcorder or cassettes in a car or
outdoors for an extended period.
Excessive heat or cold might damage
your cassettes.
• Keep the cassette away from strong
magnetic fields such as electric motors
and other devices.
Insert and Remove Cassettes
• Keep dust from entering the cassette
compartment. All dust is abrasive and
causes excessive wear on the tape and
the camcorder’s recording or playback
heads.
• Do not use cassettes with damaged or
spliced tape.
• Do not use a cassette if it has been
damaged or exposed to moisture. The
tape might jam and/or damage your
camcorder.
Before inserting a cassette, turn the tape
wheel on the side of the cassette in the
direction shown to remove any slack in
the tape.
1. Slide the EJECT switch. The cassette
holder opens automatically.
2. Insert the cassette with the tape wheel
facing up and tape window facing out.
3. Press on the cassette door button until
the cassette holder locks into place.
Tape Wheel
Tape
Wheel
EJECT Switch
SP/SLP Button
Press on the button on the
cassette door to close and
lock the cassette
compartment.
Tape Window
Warning:
Never try to
open the
door by
prying as
you could
damage the
camcorder.