Filter
Top Products
53
Recording
6. Rotate the MENU dial to highlight
the desired time between recordings
(15S, 30S, 1 MIN, or 5 MIN).
• Select 15S to delay the recording
for 15 seconds.
• Select 30S to delay the recording
for 30 seconds.
• Select 1MIN to delay the recording
for one minute.
• Select 5MIN to delay the recording
for five minutes.
• Select OFF if you do not want the
camcorder to delay recording.
7. Press the MENU dial in to display the
second MENU. Rotate the MENU
dial to highlight REC TIME.
BACK
REC TIME
INT. TIME
TALLY LAMP
CHARACTER
JLIP ID NO.
DEMO MODE
MENU END
OFF
OFF
ON
07
OFF
8. Press the MENU dial in to display the
REC TIME menu.
OFF
1/4 S
1/2 S
1 S
5 S
EXIT
REC TIME
9. Rotate the MENU dial to highlight
the amount of time you want the
camcorder to record.
• Select 1/4S to record for 1/4
second.
• Select 1/2S to record for 1/2
second.
• Select 1S to record for one
second.
• Select 5S to record for five
seconds.
• Select OFF if you do not want
to record for a selected amount
of time.
10. Press the MENU dial twice to exit the
menus.
and the amount of recording time
and and the amount of interval
time between recordings appear in
the viewfinder.
15S
5S
11. Press the thumb trigger to start
recording.
Note: The camcorder starts and stops
recording the selected amount of time.
The tally light flashes with the flash
speed increasing five seconds before
recording begins.
12. To stop recording, place the
camcorder in record-pause, and set the
REC TIME and INT. TIME in the
second MENU to OFF.
Note: Fade does not operate during animation
or time-lapse recording.
Time-Lapse Recording (continued)