RCA F32715 Camcorder User Manual


 
19
Interactive Setup
If You Have Both a Satellite
Receiver and a Cable Box
Connected to the TV
The remote cannot control both a cable
box and the satellite receiver. If you
choose to have the remote control the
satellite receiver, you must then use your
cable box remote to control the cable box.
You may, however, prefer to use the
satellite receiver remote for satellite
programming, and set your SATCABLE
button to control your cable box. Its your
choice.
2. Point to the choice that matches the way you have your DVD player
connected to the TV. If you used audio/video cables, choose the
video input you connected the cables to.
3. Press MENU or OK to continue.
Setting the SAT/CABLE Channel
(auto tuning)
The next step lets you set the SAT/CABLE channel. When you set the SAT/
CABLE channel, youre telling the TV what channel to tune to when you
press the SATCABLE button on the remote.
Indicate which input you used to connect a satellite receiver or a cable
box. If you dont have a satellite receiver or cable box connected to the
TV, skip this step or select Not Connected from the SAT/CABLE Channel
choice list. (For more, see Auto Tuning in the Features and Menus
section.)
SETUP
Would you like to use a cable
box or satellite unit with your
TV?
1 Use with cable or satellite
2 Skip this step
1. Press MENU or OK to bring up the SAT/CABLE choice list.
SET SAT/CABLE CHANNEL
1 Not connected
2 Channel 2
3 Channel 3
4 Channel 4
5 Video 1 Input
6 Video 2 Input
2. Point to the choice that matches the way you have your satellite
receiver or cable box connected to the TV. If you used audio/video
cables, choose the video input you connected the cables to.
3. Press MENU or OK to continue.